Hapi Electrical, Local Rotorua Electrician home page 24/70800 300 228Call

A breaker that keeps tripping, traced and fixed

A safety switch or breaker that won’t stay on is doing its job: it cuts the power because something on that circuit is wrong. Matenga tests the circuit, finds the fault and fixes it, day or night.

★★★★★

Awesome sparky, highly recommended.

Tama W. · Google review
Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Who comes out
Matenga and the team, based in Rotorua
  • Registered electrician, E 282350
  • Free quotes
  • Rotorua city and suburbs

What’s happening right now?

Cable hanging from a wall, its red, black and green cores blackened and blistered by heat
Cable pulled out of a wall, the insulation blackened by heat.

A breaker or safety switch that keeps tripping

Right now: switch off the lights and unplug everything on that circuit, then reset it once. If it trips again, leave it off and call.

Matenga tests the circuit to find what’s tripping it, from a faulty appliance or water in a fitting to damaged cable, and repairs it.

Try this once

  1. Unplug the circuit

    Switch off the lights and unplug everything on the circuit that tripped.

  2. Reset it

    Push the breaker or safety switch back up. If it holds, plug things back in one at a time and switch each on.

  3. Find the culprit

    If it trips when one appliance goes on, that appliance has the fault. Leave it unplugged.

  4. Trips with nothing on?

    Then the fault is in the wiring. Leave it off and call us.

After water damage or a shock, don’t reset it at all: leave it off until an electrician has checked it.

What makes a circuit trip

A breaker trips when a circuit draws more than it’s built for, or when there’s a short. A safety switch trips when current leaks out of the circuit, through damp, damaged insulation or a person. The faults behind it:

  • An appliance with a fault: a kettle, heater, washing machine or dryer
  • Water in an outdoor socket, an outside light or a cable run outside
  • Cable damaged by heat, a nail, a screw or rodents
  • A worn or loose connection in a switch, socket or light
  • Too much running on one circuit at once
A hand holding a burnt power point pulled out of a red wall, the wiring behind it charred black
A burnt power point opened up, the wiring behind it charred.

Lights that flicker or dim

Lights that flicker, or dim when the heater or the jug goes on, and switches that crackle point to a loose or worn connection. Turn that light off and get it looked at: a loose connection gets hot, and heat is what burns power points and cable.

What a safety switch is for

A safety switch, or RCD, watches the current on a circuit and cuts the power the instant some leaks to earth, such as through a person, to stop a shock from being fatal. New lighting and power-point circuits in homes must have RCD protection, and it lives at the switchboard. Test yours every six months with its test button.

When the switchboard is the problem

In an older Rotorua home the board itself can be the fault: rewireable fuses, no safety switches, scorch marks, or a board that’s warm or buzzing. Matenga and the team upgrade old boards to a modern switchboard with RCD protection, on a weekday with a free quote.

Rotorua’s geothermal air is hard on copper, and field trials found it corroding faster than at a clean-air site in every part of the city they tested. A board with blackened copper is worth sending a photo of.

What happens when you call

  1. Call, day or night

    Ring the number any hour, or send the problem with a photo. Tell us what’s happening and where.

  2. Make it safe while you wait

    Do the right-now step for your problem, keep everyone clear of it, and leave anything scorched or wet alone.

  3. Matenga comes to you

    Matenga and the team come out anywhere in Rotorua, find the fault and make it safe.

  4. Fixed and tested

    What’s burnt or failed is replaced and tested before the power goes back on. Bigger work, like a new switchboard, gets a free quote.

★★★★★

Awesome communication and on to it with diagnosing and fixing the problem. Would definitely recommend and hire again!

Taylor G.Google review · a fault

What sets the cost

  • What’s causing the trip, and where it is
  • The parts: a breaker, a safety switch, a fitting or a length of cable
  • Whether the switchboard is due for an upgrade
  • How long the fault takes to find

Questions

Something else? Call 0800 300 228 any hour, or send it with a photo.

Why does my safety switch trip when it rains?

Water has got into something on that circuit: an outdoor socket, an outside light or a cable run outside. Leave it off and call us to find where.

Is it the appliance or the wiring?

Unplug everything on the circuit and reset it. If it holds, plug things back in one at a time: the one that trips it has the fault. If it trips with nothing plugged in, the fault is in the wiring, and that’s for us.

Can it wait until morning?

Not if anything is burning, sparking, hot to touch or wet, or if a switch won’t stay on: leave it off and call 0800 300 228 now, any hour. If the house is safe and you have the power you need, ring when it suits: weekday work runs Monday to Friday, 6am to 6pm.

Can I keep resetting it?

Reset it once. If it trips again, leave it off: it’s protecting you from a fault.

Should my old board have safety switches?

New lighting and power-point circuits must have RCD protection. If your board has none, ask Matenga about a switchboard upgrade: the quote is free.

Send the problem

Pick what’s happening, add a photo, and tell Matenga what you’re seeing. If it can’t wait, call.

Call 0800 300 228

What to send Matenga

  • A photo of it: the power point, the switchboard with its door open, or the cylinder
  • What happened just before it went
  • Which rooms or switches are off
  • Whether the neighbours have power
  • Your suburb

Once it’s sent, Matenga comes back to you about the problem and sets a time. If it can’t wait, call 0800 300 228, any hour.

Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Registered
Electrician, E 282350
What’s happening?
Is it urgent? (optional)

    Fields are required unless marked optional. Privacy policy