Hapi Electrical, Local Rotorua Electrician home page 24/70800 300 228Call

No hot water? Elements and thermostats replaced

A cold shower from an electric cylinder points to the element, the thermostat or the cylinder’s switch. Matenga tests each one and replaces the part that has failed, so the cylinder heats again.

★★★★★

Awesome communication and on to it with diagnosing and fixing the problem. Would definitely recommend and hire again!

Taylor G. · Google review
Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Who comes out
Matenga and the team, based in Rotorua
  • Registered electrician, E 282350
  • Free quotes
  • Rotorua city and suburbs

What’s happening right now?

A burnt-out hot water cylinder element, black and flaking, lying beside a clean new element on carpet
A burnt-out hot water element beside its new replacement.

No hot water

Right now: leave the covers on your cylinder’s thermostat and element: they’re there to stop electric shock.

Matenga tests the element, the thermostat and the cylinder’s switch, and replaces the part that has failed.

Before you call

  1. Check the switchboard

    The cylinder has its own circuit. A tripped switch or a blown fuse there stops it heating.

  2. Leave the covers on

    The covers over the thermostat and element are there to stop electric shock. Keep them on.

  3. Note what you see

    Water stone cold, or lukewarm? Tripping when it heats? Tell us when you call.

What fails in an electric cylinder

The element is the part that heats the water, and when it burns out the water goes cold. A thermostat that has failed can leave it cold or lukewarm, and a worn switch or connection at the cylinder can stop it heating altogether.

Matenga tests the element, the thermostat and the supply, finds which has failed, and replaces it.

When the cylinder trips the power

A cylinder that trips the safety switch or a breaker each time it heats has a fault to earth, and the element is the first suspect. Leave that switch off at the board and call: it’s protecting you from a shock.

If the cylinder has its own isolating switch nearby, leave it off too until Matenga has tested the element.

What to tell us when you call

  • Is the water stone cold, or lukewarm?
  • Did a switch trip at the board when it went cold?
  • Roughly how old is the cylinder?
  • A photo of the cylinder and its label, if you can get one

What happens when you call

  1. Call, day or night

    Ring the number any hour, or send the problem with a photo. Tell us what’s happening and where.

  2. Make it safe while you wait

    Do the right-now step for your problem, keep everyone clear of it, and leave anything scorched or wet alone.

  3. Matenga comes to you

    Matenga and the team come out anywhere in Rotorua, find the fault and make it safe.

  4. Fixed and tested

    What’s burnt or failed is replaced and tested before the power goes back on. Bigger work, like a new switchboard, gets a free quote.

Easy and fast to make contact with, prioritised our need for hot water . Wa an open to doing the mahi while I was at mahi myself left area clean. Bonus for me hope to hot water and payment method was easy too . E mihi ana Hapu Electrical

Tui Y.Facebook recommendation · hot water

What sets the cost

  • Which part has failed: the element, the thermostat or the switch
  • The cylinder’s make and the part it takes
  • Whether the wiring to the cylinder needs work too
  • How long the job takes

Questions

Something else? Call 0800 300 228 any hour, or send it with a photo.

How do I know it’s the element?

The cylinder has power but the water stays cold or lukewarm. Matenga tests the element and the thermostat to tell which has failed.

Is no hot water an emergency?

If you’ve got a family to wash, it can be. Call 0800 300 228 any time and tell us what’s happening.

Why does the cylinder trip the power?

An element that has failed can leak current to earth, and the safety switch cuts the power to stop a shock. Leave it off and call us.

Send the problem

Pick what’s happening, add a photo, and tell Matenga what you’re seeing. If it can’t wait, call.

Call 0800 300 228

What to send Matenga

  • A photo of it: the power point, the switchboard with its door open, or the cylinder
  • What happened just before it went
  • Which rooms or switches are off
  • Whether the neighbours have power
  • Your suburb

Once it’s sent, Matenga comes back to you about the problem and sets a time. If it can’t wait, call 0800 300 228, any hour.

Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Registered
Electrician, E 282350
What’s happening?
Is it urgent? (optional)

    Fields are required unless marked optional. Privacy policy