Hapi Electrical, Local Rotorua Electrician home page 24/70800 300 228Call

Burnt, melted or dead power points, replaced

A scorch mark, a smell like hot plastic or a socket gone soft and brown is heat where there shouldn’t be any. Stop using it and call: Matenga replaces the power point and fixes the wiring behind it.

★★★★★

Awesome communication and on to it with diagnosing and fixing the problem. Would definitely recommend and hire again!

Taylor G. · Google review
Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Who comes out
Matenga and the team, based in Rotorua
  • Registered electrician, E 282350
  • Free quotes
  • Rotorua city and suburbs

What’s happening right now?

A white double power point burnt black around both sockets, with black scorch marks running up the wall above it
A double power point that burnt through and scorched the wall.

A burning smell or a scorch mark

Right now: if it’s safe, unplug it or turn the power off. Never put water on an electrical fire, and if there’s smoke or flame, get out and call 111.

Matenga traces where the heat came from, behind the plate as well as at it, and replaces what’s burnt.

Right now

  1. Stop using it

    Don’t plug anything back into a power point that’s melted, scorched or hot to touch.

  2. Turn it off if it’s safe

    Unplug what’s in it, or turn the power off at the switchboard if you can reach it safely.

  3. No water on it

    Never put water on an electrical fire.

  4. Smoke or flame?

    Get everyone out and call 111.

Then call Matenga, any hour: he and the team come out, find where the heat came from and replace what’s burnt.

Why power points burn

Heat builds where electricity meets resistance: a terminal screw that has worked loose, worn contacts in an old socket, a heater or dryer running hard through an adapter, or cable damaged behind the plate. In Rotorua add the geothermal air, which tarnishes copper. The plastic browns, then melts, and the wall above starts to scorch.

Signs a power point is on its way

  • A plug or socket that’s hot to touch, or has brown scorch marks
  • A smell like hot plastic, with nothing switched on
  • Crackling or buzzing from the socket
  • A plug that sits loose, or only works when it’s wiggled
  • A switch that’s gone discoloured or soft

Seen one of these? Send Matenga a photo of it with the problem, or call any hour.

What Matenga does

Matenga opens the power point up, follows the heat back along the wiring, cuts out anything burnt and replaces the power point. Then it’s tested before the circuit goes back on.

A dead power point gets the same care. If nothing has tripped at the switchboard and one socket, or a whole row, is dead, there’s a break or a burnt connection somewhere on that circuit, and that’s what Matenga finds.

A yellow plug-in socket tester showing a green light in a new white power point beside a timber door frame
A new power point, tested and reading correct.

What happens when you call

  1. Call, day or night

    Ring the number any hour, or send the problem with a photo. Tell us what’s happening and where.

  2. Make it safe while you wait

    Do the right-now step for your problem, keep everyone clear of it, and leave anything scorched or wet alone.

  3. Matenga comes to you

    Matenga and the team come out anywhere in Rotorua, find the fault and make it safe.

  4. Fixed and tested

    What’s burnt or failed is replaced and tested before the power goes back on. Bigger work, like a new switchboard, gets a free quote.

★★★★★

Ngā mihi nunui Hapi Electrical. Amazing expertise, speedy job and great price. Would highly recommend this business for all your electrical needs.

Anna H.Google review · a repair

What sets the cost

  • How far the heat has gone into the wiring
  • How many power points need replacing
  • Whether the cable behind them needs replacing too
  • How long the job takes

Questions

Something else? Call 0800 300 228 any hour, or send it with a photo.

Is a scorch mark on a power point dangerous?

Yes. Brown scorch marks or a socket that’s hot to touch are signs the wiring is getting dangerous. Stop using it and get it checked.

Can I just change the faceplate?

A new faceplate over burnt wiring hides the fault. The heat came from a connection behind it, and that’s what needs fixing.

Do you replace old power points around the house?

Yes. On a weekday, Matenga and the team replace tired power points and switches room by room, with a free quote.

Send the problem

Pick what’s happening, add a photo, and tell Matenga what you’re seeing. If it can’t wait, call.

Call 0800 300 228

What to send Matenga

  • A photo of it: the power point, the switchboard with its door open, or the cylinder
  • What happened just before it went
  • Which rooms or switches are off
  • Whether the neighbours have power
  • Your suburb

Once it’s sent, Matenga comes back to you about the problem and sets a time. If it can’t wait, call 0800 300 228, any hour.

Emergencies
24 hours, 7 days
Everything else
Monday to Friday, 6am to 6pm
Registered
Electrician, E 282350
What’s happening?
Is it urgent? (optional)

    Fields are required unless marked optional. Privacy policy